Iranian Classification Society Rules

Iranian Classification Society Rules

2015

Introduction to the Classification Technical Rules

ICS 1. LIST OF CLASSIFICATION TECHNICAL RULES 1 3. CONTENTS OF CLASSIFICATION TECHNICAL RULES 7 4. CONVERSION TABLE OF SI UNITS 75 1. LIST OF CLASSIFICATION TECHNICAL RULES 2. USER'S GUIDE TO CLASSIFICATION TECHNICAL RULES 2.1 General Rules, in principle, shall come into force after 3 months from the approved date and "Major Changes and Effective Date" is recorded at the beginning of each Rule for ready use."Rules for the Classification of Steel Ships" is composed of 12 parts and "Guidance Relating to the Rules for the Classification of Steel Ships" is composed of 10 parts.(1) In principle, the text consists of Part, Chapter, Section, Article, Paragraph, Sub-paragraph, (A),(3) The number of a figure or a table consists of part, chapter and serial number in each chapter. table number is placed in (1) In principle, the text consists of Chapter, Section, Article, Paragraph, Sub-paragraph, (A), (a) and (i).2.4 Cross-Reference to Articles and Paragraphs (1) Where a paragraph in any chapter is quoted from an other chapter in the same part, the chap- ter, relevant article and paragraph are written in sequence.(2) Where a paragraph in any part is quoted from an other part, the part, chapter, relevant article and paragraph are written in sequence.Where the contents of any rules are quoted in the rules other than 2.4.1, the names of the rules, part, chapter, relevant article and paragraph are written.Ch 2, 202. of "Rules for the Classification of Steel Ships" is quoted in 2.5 Cross-Reference to Figures and Tables (1) Where a figure or a table in any chapter is quoted from an other chapter in the same part, the number of the figure (or the table) is written.(2) Where a figure or a table is quoted from an other part, the part and the number of the figure (or the table) are written.Where a figure or a table of any rules is quoted in the rules other than 2.5.1, the name of the rules, the part and the number of the figure (or the table) are written.2.6 Units 3. CONTENTS OF CLASSIFICATION TECHNICAL RULES 3.1 Contents of Rules for the Classification of Steel Ships PART 1 CLASSIFICATION AND SURVEYS PART 2 MATERIALS AND WELDING PART 3 HULL STRUCTURES PART 4 HULL EQUIPMENT PART 5 MACHINERY INSTALLATIONS PART 6 ELECTRICAL EQUIPMENT AND CONTROL SYSTEMS PART 7 SHIPS OF SPECIAL SERVICE PART 8 FIRE PROTECTION AND FIRE EXTINCTION PART 10 HULL STRUCTURE AND EQUIPMENT OF SMALL STEEL SHIPS PART 11 COMMON STRUCTURAL RULES FOR BULK CARRIERS PART 12 COMMON STRUCTURAL RULES FOR DOUBLE HULL OIL TANKERS PART 13 COMMON STRUCTURAL RULES TANKERS 3.2 Contents of Guidance Relating to the Rules for the Classification of Steel Ships PART 1 CLASSIFICATION AND SURVEYS PART 2 MATERIALS AND WELDING PART 3 HULL STRUCTURES PART 4 HULL EQUIPMENT PART 5 MACHINERY INSTALLATIONS PART 6 ELECTRICAL EQUIPMENT AND CONTROL SYSTEMS PART 7 SHIPS OF SPECIAL SERVICE PART 8 FIRE PROTECTION AND FIRE EXTINCTION PART 9 ADDITIONAL INSTALLATIONS PART 10 HULL STRUCTURE AND EQUIPMENT OF SMALL STEEL SHIPS 3.3 Contents of Rules for Offshore Structure RULES FOR THE CLASSIFICATION OF MOBILE OFFSHORE UNITS RULES FOR THE CLASSIFICATION OF FIXED OFFSHORE STRUCTURES RULES FOR THE CLASSIFICATION OF MOBILE OFFSHORE DRILLING UNITS 3.4 Contents of Guidance for Offshore Structures GUIDANCE RELATING TO THE RULES FOR THE CLASSIFICATION GUIDANCE FOR FLOATING LIQUEFIED GAS UNITS 3.5 Contents of Other Rules RULES FOR THE CLASSIFICATION OF DREDGERS RULES FOR THE CLASSIFICATION OF UNDERWATER VEHICLES RULES FOR THE CLASSIFICATION OF FRP SHIPS RULES FOR THE CLASSIFICATION OF FLOATING DOCKS RULES FOR THE CLASSIFICATION OF HIGH SPEED AND LIGHT CRAFTS RULES FOR THE CLASSIFICATION OF TOWING 3.6 Contents of Other Guidance GUIDANCE RELATING TO THE RULES FOR THE CLASSIFICATION OF STEEL BARGES GUIDANCE RELATING TO THE RULES FOR THE CLASSIFICATION OF UNDERWATER VEHICLES GUIDANCE RELATING TO THE RULES FOR THE CLASSIFICATION OF FRP SHIPS GUIDANCE RELATING TO THE RULES FOR THE CLASSIFICATION OF FLOATING DOCKS GUIDANCE RELATING TO THE RULES FOR THE CLASSIFICATION OF HIGH SPEED AND LIGHT CRAFTS GUIDANCE FOR APPROVAL OF MANUFACTURING GUIDANCE FOR FLOATING STRUCTURES GUIDANCE FOR FREIGHT CONTAINERS GUIDANCE FOR SINGLE POINT MOORING GUIDANCE FOR RECREATIONAL CRAFTS YACHTS GUIDANCE FOR GAS-FUELLED SHIPS GUIDANCE FOR FUEL CELL SYSTEMS ON BOARD OF SHIPS GUIDANCE FOR SHIPS FOR NAVIGATION IN 4. CONVERSION TABLE OF SI UNITS (1) Assignment of Load Line (4) For vessels of 24 m in length and over, and for domestic voyage, the load line mark is to be as shown in Fig 3. However, for the vessels navigating solely on lakes and rivers sub-para- graph (5) may be applied.ICS